News

This electric press tool removes the hassle of tangled power cords and separate hydraulic pump hoses, enabling technicians to work in tight under-sink or ceiling space without the mobility constraints. With an internal sealed oil chamber, this MARSHINE Hydraulic Press Tool applies a consistent 19 kn pressing force over the whole crimping operation, which prevents uneven joint pressure that can create invisible pipeline leaks in the future. And at only two kg, the lightweight pipe press tool reduces wrist fatigue during bulk jobs with copper and stainless steel pipe, a major benefit for teams doing dozens of fittings each day. The 180°rotatable jaw head provides even more functionality to work on angled pipe runs that you can not access with a standard fixed-head tool easily. The MARSHINE Battery Press Machine is powered by 18 volt lithium battery with wide voltage charging compatibility that can be charged quickly from local power supply without the need for any converter. Each cell, when fully charged that can crimp around 250 times on DN20 stainless tubing, minimizing interruptions during work. This hydraulic press tool has a 30 mm piston stroke and it is 2 to 4 seconds per each joint, which can provid faster installation rate than slow manual crimping options. The integrated OLED display monitors crimped counts and battery reserves, which allows users to plan for scheduled maintenance before performance degradation. This multi-function pipe press tool can be fitted with interchangeable TH, V and M series jaws to handle copper, stainless steel and multilayer plastic pipes in a broad range of sizes that are most commonly applied in heating and gas pipelines. Its standardized service life of 10,000 presses reduces repair costs in the long run.

Region crews in the past have faced challenges in physically difficult-to-reach mountain, forest, and rivershore areas where their equipment depended on an external generator or house power, but now modern self-contained pulling equipment removes that biggest workflow obstruction. The MARSHINE Engine Driven Capstan Winch operates on its own with a 9 horsepower air-cooled, internal combustion engine with electric start, eliminating the inconvenience of manual cranking in chilly, wet field environment. This tough Gas Powered Capstan Winch Machine provides a maximum pulling rating of 10000 lbs, with 4 unique speed levels, which offer users an option of slow controlled heavy pulling or fast empty rope retrieving without turning the power off. And While the wired electric pulling gear can’t get to scattered remote working sites, this machine simply ditches the wired setups, and is an easy fit on a common light duty truck for transportation between job sites scattered about.  The MARSHINE Petrol Capstan Winch is designed along the same compact framed and safety brake line as the diesel winch, allowing for an equalising option for teams operating cross-region with different fuel supply availability. The Engine Driven Capstan Winches are included a textured capstan roller providing a constant tension over steel cables, to avoid dangerus slippage when pulling loads up steep terrain gredients. A fully enclosed transmission housing keeps mud, dust and water out of the primary gear components reducing the maintenance intervals for teams riding 365 days a year. From overhead power cable stringing and utility pole installation to forestry log hauling and four-wheel drive recovery, the petrol capstan winch and diesel capstan winch provide dependable traction power without relying on an external power source cutting project.

Field foremen in factories and on construction sites are trading their marginal single phase lifting tools for rugged powered lifting equipment, and the MARSHINE Electric Hoisting Winch is a dependable all-weather workhorse that can handle heavy duty tasks over long periods of time. Based on 415V three phase induction motors with IP44 insulation, this AC electric winch outputs a constant torque without any voltage fluctuation even when lifting in multiple shits. The electric drum winch has enclosed steel flanges on the drum that prevent the wire rope from jamming between the frame members, avoiding unplanned downtime resulting from wrapped cables on high production sites. All models in this range feature heat treated planetary gear assemblies and full ball bearing running surfaces which reduces noise levels and increases the overall service interval for day-to-day use.  The three phase electric winch features an electromagnetic fail-safe brake that locks the drum instantaneously upon power failure, eliminating the risk of load slip when sudden power loss occurs, especially in remote construction site. This MARSHINE AC Electric Winch comes with a standard 3M low voltage pendant control with emergency stop, and has an optional wireless remote control unit allowing to operate the machine from safe distance while moving suspended loads. The electric drum winch can accommodate various sizes of wire rope from 10mm to 22.4mm with the length of drum customized to cater for 60 - 200m of cable for high-rise lifting and long distance horizontal pulling. This thing delivers excellent traction capacity on sloped ground surfaces between a mild 6-degree incline and a brutal 39-degree slope, and when combined with snatch blocks, line pull power can be increased up to approximately 85 percent for large loads.

Induced static and stray currents are a huge danger to overhead power line construction workers, but power crews today have dedicated pulley gear to they can handle the problem. The grounded pulley block combines the ease of wire guiding and the assurance of safe current dissipation in one neat package, eliminating any hidden electrical hazard while maintaining conductor momentum in tension stringing applications. Designed with galvanized steel frames and high-quality wheel materials, this instrument resists long-term exposure to wind, rain and intense sun on outdoor work locations. The MARSHINE Grounding Pulley Wheel operates on precision sealed bearings, which significantly reduces friction and prevents surface scratches on delicate power conductors or steel strands during long working hours.  The earthing cable pulley is available in various wheel sizes with base diameters of 50 mm and 75 mm, that caters a wide spectrum of conductors size for flexible application. Its entire lightweight construction, from 4.5 kg to 10 kg, allows crews to install and move the unit on tower frames or tension machine outlets without the need for additional lifting equipment. The flexible spring compression system presses the wire down avoiding line jumping even in sloping surfaces or working speed line pulling. A standard 25㎟ grounding cable can be used with the MARSHINE Grounded Pulley Block to complete your earthing circuit, assuring you of the complete dissipation of residual electricity at all times. Whether used for new line construction in mountainous terrain or simple wire replacement on older grid networks, the grounding pulley wheel performs in the same manner. The earth cable pulley has now become major safety accessory in the all type of power building and maintenance works making work flow safer and smoother for field operators.

The industrial electric winch is definitely true that for today's building and site work you need lifting gear to hold the load and let you move fast, and this custom engineered load holding lifting gear meets the criteria of many big jobs. A machanical Industrial Electric Winch, with bright future, featuring the precision gear sets and dependable braking units that facilitate a smooth rotation even in continuously working conditions. It achieves a running speed of 1440 RPM and uses F class insulation, which can avoid over-heating and allow working 24/7 at rush sites. This MARSHINE Electric Lifting Winch has 3 phases 220V to 690V with several control voltages available for hard-wired control versions to satisfy numerous regional power requirements. With working speed ranging from 22mpm to 30 mpm, it facilitates the material handling speed in significant degree as compared to traditional slow speed lifting units.  The heavy-duty electric winch is suitable with right-sized wire rope, is available in sizes between 7.5 mm and 30 mm for different load requirements, you can choose yours from a wide load range from 5 kN to 100 kN. Each series features a large capacity drum that can store wire rope from 80 to 300m, suitable for high-rise hoisting or long distance horizontal pulling. With compact mechanical structure, the MARSHINE Industrial Electric Winch occupies small installation space and is easy to maintain with common tools without the need of special skills. It produces an extremely low noise when operating, so the workers on site will be more comfortable when working. The strong design and versatile characteristics make this one of the best solutions for industrial lifting equipment needs. 

A growing number of industrial technicians and field servicers are opting for mobile, modular pumping solutions over cumbersome fixed pumping configurations, and a trusted member of these solutions, the electro hydraulic pump is versatile enough to lead among countless applications. Producing a uniform high-pressure output of max 700 bar, the machine makes use of a two-speed flow regimen that maximizes in work efficiency and operation precision in everyday work. This MARSHINE Portable Hydraulic Power Pack is a finely designed product and it also weighs just 18 Kgs with a comfortable handle for one man to haul it around from indoor workshop to various outdoor construction locations. It has a built-in oil tank containing 7 liters of hydraulic fluid, which not only increases continuous running time but also reduces the frequent refilling in busy work schedule. The built-in pressure gauge enables users to monitor the live data information and guarantee that every mission is accomplished under the safe pressure range in the process.  The small hydraulic pump station has a strongbody that is sealed against dust, rain and moist air, so it can work stably even in severe outdoor conditions. With an automatic pressure relief valve, the damage to internal parts due to sudden overload is prevented effectively, thereby sufficiently improving the total life. With robust 750 watt copper motor and dual voltage 110 volt and 220 volt power input to be compatible with different country’s electrical standards. The MARSHINE Portable Hydraulic Power Pack readily interfaces with a wide range of hydraulic tools such as punching machines, cutting tools, and stretching cylinders to deliver a complete portable hydraulic work system . For mechanical stripping in workshops, metal working in small factories, or power equipment servicing in the wilderness, the electro hydraulic pump provides steady, reliable power assistance.

The hydraulic punching press utilizes the best dual-loop hydraulics circulation to proximity reduce stroke lag, achieving smooth 100-ton punching force that surpasses single-circuit type models even for long daily work. As a heavy duty MARSHINE Industrial Punching Press designed specifically for the harsh environments of a home or custom workshop, it equalizes your output force on each punch cycle in order to maintain consistent roundness in finished holes even if you are running non-stop in-batch processing of construction-grade steel. Unlike compact hand tools that can only handle thin materials, this Hydraulic Hole Press may be used to work on thick structural stock, allowing crews to work heavy-duty angle and channel steel with one tool rather than moving the work across multiple machines. Its small 370-millimeter cubic size allows easy integration with existing production lines, without the need to remodel an entire workshop to install new heavy machinery.  Tools can be more easily positioned and re-positioned as holes are punched quickly in workpiece. The MARSHINE Hydraulic Punching Press has a deep 135mm throat, providing plenty of space for operators to move long steel extrusions and to space holes on long workpieces. Its up to 30mm adjustable stroke can be adapted to the thickness of iron plate of 20mm, it can also be used for 8-15 angle iron, 10-15 channel steel which are widely used in infrastructure, rack-making. Arriving ready for work with four popular die sizes, it quickens downtime caused by tooling changes for frequent shifts in work. The reinforced cast housing absorbs working vibration and ensures long-term working reliability with less maintenance. This industrial punching press transforms reliance on time-consuming mechanical drilling of thick structural parts, truncating project turnaround times and labour overhead for metal fabricators.

Conventional metal hole punching is performed on bench-mounted machine tools confined within processing shops, requiring field workers to carry raw angle steel and busbar materials back and forth between facilities, squandering valuable project time in transportation and wait cycles. The handheld MRSHINE Electric Punch Press revolutionizes this archaic practice by delivering hole punching directly to the outdoor mounting environment. It is a small metal punching device in 110V/220V power pack that can be switched over worldwide powered by powerful 1800W motor and makes a perfect choice under different electricity conditions in varying countries and worksites. At only 12 kg, a single person can freely move and position the unit, no heavy lifting gear or permanent mounting brackets needed. The 4# and 6# angle iron of this Metal Punching Tool can be pushed through with standard projections for the full 40-millimeter throat depth that provides plenty of working space, enabling operators to line up the workpieces with precision. This durable Steel Punch Machine comes with 5 interchangeable standard dies, the most commonly used holes size in one package, such as users can avoid cost for buying the tools repeatedly. Integrated hydraulic system structure, at the same time copper aluminum busbar, regular steel plate can be processed punctured thickness up to 5mm,holes smooth without burr and no secondary filing or grinding work after finishing. Once one process finished, no need to take next process on file or on grinding. Hardened internal parts resist wear from constant daily use on the jobsite. The MRSHINE Electric Punch Press is ideally suited for electrical cabinet manufacturing, steel support frame building, and on site customizing of pre-cut metal pieces.

Field crews engaged in power and communication line installation increasingly rely on all-in-one mobile equipment to streamline workflows, and this versatile MRSHINE Utility Pulling Vehicle has emerged as a practical solution for diverse outdoor pulling tasks. Built with a flexible pulling range spanning 9KN to 50KN, it adapts seamlessly to light cable routing and heavy-duty conductor hauling across different project scales. As a well-designed mobile line puller converted from standard tractors, it boasts impressive off-road performance and glides smoothly over rough rural paths, muddy construction lots and uneven hillsides without getting stuck. The unique double-sided reel design is suitable for different rope types and allows special non-twisting wire ropes to be used without wear and tear while also working with standard steel cables and nylon lines. The gear range can be changed on the site by the operators to provide maximum ifne agility for short-distance hauling and continuous pulling in a day. This robust traction winch machine stands out for its reliable dual braking system, which delivers steady load holding and eliminates slipping risks during temporary halts or slope operations. In addition to simple pulling operations, the unit can be combined with matching tow cases in transporting cement poles and small hand tools, reducing the demand for additional transport vehicles on job sites that are spread out. From laying new power cables in remote villages to maintaining existing utility networks and handling temporary hoisting jobs on construction sites, the MARSHINE Mobile Line Puller combines mobility, multi-functionality and durable build. This simplifies the day-to-day activity for utility crews and turns it into a cost-effective workhorse for outdoor construction and repair work throughout the year.

Nowadays power line construction spans over immense and mountainous areas, and at that the conventional static traction equipment can hardly keep pace with the site-move frequency. Mobile cable traction machines are far superior in this application. Delivering up to 120kN of traction force, these machines are revolutionising field operations with their autonomous mobility and strong traction force. The MRSHINE Self Propelled Cable Puller Machines remove the need for multiple transport vehicles and operators can take them directly to hillsides, riverbanks and secluded area worksite. Their variable speed control addresses different construction needs, high-speed travel is intended for traditional cable traction, Deceleration mode is to be used for the accurate pulling of high voltage bundled conductor. Sturdy traction drums steadily hold even thick steel wire ropes without causing tangles and mess even after long hour of use on rough terrain.  In practice the tractor puller winch machine is a dependable tractor winch. A finely tuned hydraulic system keeps a constant tension in the pulling process, which enables the protection of the cable sheath from impact force changes. In case of overpressure safety modules are engaged which automatically bring the system to a standstill mitigating potential risks for the personnel and the site materials. Construction workers prefer this multi-functional equipment for jobs including installing long span overhead lines, replacing cables over terrain and even at the end of a new power grid in a distant location. Reducing the number of auxiliary machines and the complexity of the overall process, this MARSHINE Mobile Pulling Machine brings siz able improvements to work efficiency, offering an effective solution for large-scale, complicated cable installation projects around the world.

Many field operators now are of opinion that tractor winches directly powered from the Power Take-Off are best, as such a winch runs slower and consumes less fuel and for long runs in the field it is much easier to take along a couple of gallons of diesel than a battery pack or a set of charged batteries. This tractor attachment winch, which has a rated load of 8 tons, is famous for its stable torque output, and it uses a dependable gear reduction mechanism to transform the standard rotation of the tractor into the massive pulling force that is necessary for heavy-duty work. The MARSHINE Tractor Operated Winch is designed for use with standard 20mm diameter steel wire rope and rope connectors up to a diameter of 60mm can be easily passed through during the process of winding/unwinding. Operators can select the speed of operation according to the load to ensure the efficiency of operation, the operation speed should be steady and low when carrying the maximum loads, it can be a little faster when carrying lighter loads.  Built for the rigors of outdoor use, the farm tractor winch has a heavy-duty steel housing with sealed internals that keep out dust, mud, and water from the essential drive mechanics. The integral braking system activates immediately when power is interrupted, safely holding the load of heavy masses on slopes and preventing substantial safety hazards during work interruptions. It is also utilized for pulling heavy farm machinery, piling-up cleared forest, and retrieving strayed vehicles from mud or terrain. With its strong traction, adjustable speed, and rugged construction, this MARSHINE Overhead Conductor Pulling Winch is the ultimate tool for the farm crew, the power utility worker, and the rural builder, allowing them to effectively handle hard outdoor pulling jobs day in and day out.

Tension management is an obstacle that industry rod-pulling teams consistently in the global power transmission projects face, which is due to outdated analog-based pulling machines. This MARSHINE Power Transmission Pulling System generates a maximum pulling force of 80 kN and a constant output of 60 kN, so that he overhead cable laying work can be performed day and night. The operators also like to tailor the pulling speed, with a max rate of 95 m/min, so they can slow down when pulling more sensitive bundled conductors, and speed up when pulling common ground wires. This line stringing machinery has a groove-bottom diameter of 540 mm, 8 independent grooves, which is designed to precisely wrap up 21 mm steel wire ropes, precisely wraps up 65 mm cable accessories without any tangling or jamming of the wire rope.  This utility stringing equipment is driven by a water cooled diesel engine, and the pulling machine adopts the design of fully enclosed closed loop hydraulic circuit. When the hydraulic pressure suddenly falls down, the MARSHINE Transmission Stringing Equipment activates automatic brake locking right away, which can avoid huge wire rope damage and accident, even danger that could be faced if working environment embraced complex situation such as rough mountain terrain or riverbank environment. Building contractors will often opt for this machinery when taking on work in areas like stringing OPGW fiber-optic ground wires over valleys, swapping out deteriorated conductors as part of rural power grid modernization initiatives, and even stringing within confined spans when working on 220kV substation expansions.

There is a growing trend that more and more farmers or field contractors take power take-off winch. As an inexpensive attachment, the cable pulling tractor can provide a functional upgrade to an existing 70-horsepower four-wheel-drive tractor, so the cost of buying specialized towing equipment is not necessary. Designed specifically for tractors, you will find that this winch is powered from the tractor's PTO shaft with generally at the rate of 540 to 760 rotations per minute, and hence doesn't need a separate fuel engine or an external power source for carrying out day-to-day hauling errands. This MARSHINE Tractor Mounted Winch integrated seven-groove winding drum is suitable for steel cables with a maximum diameter of 18 mm and also supports connecting fittings with an inner diameter of less than 56 mm passing through safely while winding and unwinding.  The quick 3-point hitch attachment design of this agricultural tractor winch enables users to quickly attach or remove the full unit, which can allow rapid movement between jobsites. Its mechanism is made with fully sealed gear components, which keeps mud and field moisture from getting into the core drivetrain, and can help you avoid field maintenance in muddy farm fields or wet woodland settings. Moreover, the MARSHINE Tractor Winch Machine comes with an integrated fail-safe braking system, in case the operator disengages the PTO power, the drum automatically locks, which means that there won’t be any risk of cable slippage and it is safe to use.  

The tower erection winches are now a must-have mechanical device in outdoor engineering construction and in those wilderness areas with no stable power source. The MARSHINE Power Line Construction Winch is the most practical portable winch, and it is designed to provide the same traction performance. It is air-cooled diesel power can run stably for the bad weather or in the wild remote working places. The multi-stage speed adjustable unit offers a working speed from 5 to 24 m/min, which makes it flexible to be used in various traction and lifting tasks. The entire design is surprisingly small, measuring only 1100*498*600 mm externally, and being light as a feather with 137 kg weight, which make it perfectly feasible for construction men to carry it with bare hands over rock-laden trails in mountains and through dirt roads in the rural work sites.  This diesel powered cable pulling winch is equipped with heavy-duty steel frame, shaft driven transmission with precision design which greatly reduce power loss, preventing slipping for load operation. Its built-in clutching and braking mechanism enables operators to perform instantaneous stops and lock the load safely in the event operations require a temporary pause, which can provide the highest level of safety during operation. All essential parts have been treated through an anti-corrosive surface treatment, and as a result, it is possible to use the machine for a long period of time even in the field under the sky. In addition, simplified internal mechanical design reduces the routine maintenance complexity, simple maintenance is allowable without much technical skill. The MARSHINE Tower Erection Winch is specifically designed for overhead line construction, utility pole construction, cable laying and rural infrastructure development projects. 

Hydraulic pullers are essential industrial tools made for the effective and damage free extraction of bearings, gears, pulleys and more from shafts. The MARSHIEN Integrated Bearing Removal Tool can generate an amazing working force of 50 tons, so it is the best option for you to carry out heavy-duty puller jobs on huge machinery. With a maximum lateral spread of 500 mm and a maximum pull-out depth of 350 mm, it’s able to handle removal of large components with ease even in tight mechanical spaces. The working stroke of the hydraulic cylinder is 75 mm and the operators can finished the separation work with one-time continuously motion smoothly without start and stop during separation process, so it can avoid plurality for adjustment.  Made of high-strength forged alloy steel, the jaws of this hydraulic extractor tool stay rigid, do not bow or flex. Its compact integrated hydraulic design eliminates the inconvenience of external oil hoses, enabling a single operator to perform the setup and operation of the device alone. A built-in pressure relief valve offers helium tank overload protection on the go, significantly increasing the tool's life, and preventing accidental structural damage due to excessive load. The MARSHINE Hydraulic Wheel Puller comes with a compact carrying case which the 38 kg weight makes it easy to carry around between workshops and on site. 

Heavy duty cable cutter sare a must-have manual tool for power, acting as a specialized heavy-duty cable cutter to quickly, cleanly cut you power cables at a job site with a minimum of sweat on your brow. Of all these, the MARSHINE Manual Cable Cutter is considered als the best for professional use, made solid and meticulously to cut copper-core and aluminum-core armored cables upto 160mm in outer diameter. The heavy duty cable shear is designed with a telescopic frame and adjustable length between 560mm to 735mm which enables the operator to extend the handles, resulting in more leverage arm and more mechanical advantage when cutting through thick mulit-layerd cables. At 11.1kg the tool is compact enough to carry around the job site and the ease of use without the hassle of the beast makes has up got it practical enough to become your go to for cutting concrete rebar.  The high-tensile blades are precision ground and hardened through a special heat treatment that guarantees they maintain their razor sharp edge and superb wear resistance even under long high speed daily usage. A built-in ratchet and gear system enables a gradual cutting motion, turning what would be a laborious task of cutting through thick cables into a easy one. The MARSHINE Copper Cable Cutting Tool features metal surfaces have been treated for dependable rust resistance suitable for long-term outdoor use. This high strength and shear force cable cutter is perfect for a variety of tasks such as substation upgrades, urban power line maintenance, industrial wiring jobs, and laying cable in tunnels.

A trustworthy overhead line recovery machine should meet that need with a stable pulling force, adjustable speed and strong durability for working in the field. The MARSHINE Cable Stringing Traction Equipment has a maximum pulling force of 60kN and a rated working force of 50kN, which can by far deal with most of the medium voltage overhead lines both for pulling and recovery. This is because it has a maximum speed of 5 km/h and on the other hand it can maintain a constant speed of 2.5 km/h while fully loaded which allows of sufficient speed for smooth and easy construction works. The bull wheel pulling machine has 450mm diameter seven groove bullwheel capable of firmly gripping steel wire ropes of diameter 18mm. With a full hydraulic transmission system, the overhead conductor hauling system and the working speed are smoothly and steplessly adjustable to be flexibly suitable for different conductor spec with its own construction features. The instrument has intelligent overload protection system, power output is interrupted when the load goes beyond pre-defined threshold, this protect operator safety as well as integrity of the device components. The exterior of the MARSHINE Utility Line Pulling Unit has special anti-rust treatment, is resistant to wind, rain and humid environment, which can ensure that the equipment work stably outdoor under all weather conditions for a long time.

Correct stripping and cutting of cables is a fundamental requirement for safe and dependable high voltage cable assembly and directly affects the quality of subsequent cable splicing and termination connections. The MARSHINE Medium Voltage Cable Stripper is intended for 220kV HV cable, it also be used for the big size cables from 90mm to 150mm. Its adjustable depth of cut can be variable in function of your needs and you can strip with the highest possible accuracy without risk of scratching or damaging the inner strands, abrasings the surface or leaving structural indentations as some other tools may cause.  The blade is hardened steel, so it remains sharp and is very abrasion resistant even after long use in the field. This high voltage cable stripper mechanical design was optimized to reach the equal and burr free stripped surface, meet power engineering high voltage requirement. Lightweight and compact design, the MARSHINE Cable Insulation Stripping Tool can allow the user to adapt to just about any work condition, be it overhead construction or in underground trenches where space is at a premium. With excellent stripping accuracy and workability, this specialized semiconductor layer stripper prevents trouble caused by aged high-voltage transmission systems and contributes to the stable operation of power infrastructure facilities. 

This is the specially designed heavy duty electric power winch for the pulling construction of cross-river and long span transmission line and more, 100kN max pulling force can easy pull the large cross section conductors in the complicated terrrain and so on. The maximum dragging speed of the device is 5 km/h, which guarantees a smooth and continuous process of laying conductors; and the design of two hydraulics systems is to ensure constant tension output during the pulling process. The MARSHINE Conductor Pulling Equipment can be used with any conductor up to 50 mm in diameter and you can also use it to pull high voltage bundled conductors and overhead ground wires.  Before starting to pull lines, the operator must make sure the portable capstan puller is barred, and the steel wire ropes are adequately tied to the puller, to avoid any accidents such as running out of the line or sudden load shifting. The dies' built-in brake system faithfully keep the tension in the stop of the operation and activate automatically the brake protection if there is a sudden stop in power supply. Running on a diesel engine, this MARSHINE Overhead Line Winch can provide consistent, dependable functionality in the most remote locations where power cannot be accessed, on top of that, its structural design that is corrosion-resistant makes it so it can be exposed to extreme conditions such as those in humid or seaside areas. This puller greatly facilitates the work of line pulling while crossing rivers in line stringing, mountain transmission line building, and mega power grid upgrading schemes.

The transmission line winch play the kernel role in transmission line pullers, it is the primary rotating drum for the steel wire rope and realizes traction and elevating for power construction as the winch wheel in power construction. This MARSHINE Powered Pulling Winch has the following characteristics High efficient winch wheel construction-roof specially designed series suitable for outdoor over head line work with a very large traction-pull force stable over a wide range of job applications. It has a rated low-speed traction force of 50 kN, which is enough for heavy-load lifting and tensioning procedures, besides, it obtains a 45 kN medium-speed working traction power for an ideal tradeoff between the power of operation and the efficiency of construction under normal line-stringing situations. In addition, the equipment operates at high speed up to 33 m/min in no-load traction, it is featured with rope-retrieve at 7.3 m/min in reverse which help rapidly handling of rope and moving of positioning.  The utility cable winch has a winch drum groove with a standard diameter of 240 mm. This design provides a close fit to the standard steel wire rope to prevent slippage during working under high strength. Harnessing the power of a 9 kW diesel engine running at 2000 rpm, the MARSHINE Capstan Winch Machine provides solid, dependable and continuous rotational power from the winch drum at even at off-grid construction sites. With the precision gear transmission, the winch drum operates steadily and smoothly, with low noise and less mechanical wear. It contains built-in automatic safety braking mechanism which instantly Locks in case of failure offers strong protection for Construction Safety.